Ceàrnag & Tube ceart-cheàrnach
| Ainm an toraidh | Meud | Tighead balla | Ainm an toraidh | Meud | Tighead balla |
| Tiùban ceàrnagach | 20*20 | 1.3-2.5 | Ceart-cheàrnach tiùbanan | 20*30 | 1.3-2.75 |
| 25*25 | 1.3-2.75 | 20*40 | 1.3-2.75 | ||
| 30*30 | 1.3-2.75 | 25*40 | 1.3-2.75 | ||
| 40*40 | 1.3-3.75 | 30*50 | 1.3-4.75 | ||
| 50*50 | 1.3-5.75 | 30*60 | 1.3-4.75 | ||
| 60*60 | 1.3-5.75 | 40*50 | 1.3-4.75 | ||
| 70*70 | 1.3-5.75 | 40*80 | 1.3-4.75 | ||
| 80*80 | 1.3-5.75 | 50*70 | 1.3-4.75 | ||
| 90*90 | 1.3-5.75 | 50*80 | 1.3-4.75 | ||
| 100*100 | 1.5-12 | 60*90 | 1.3-4.75 | ||
| 120*120 | 2.5-12 | 50*100 | 1.3-5.75 | ||
| 140*140 | 2.75-16 | 50*150 | 1.3-5.75 | ||
| 150*150 | 2.75-16 | 60*160 | 1.3-5.75 | ||
| 160*160 | 3.0-16 | 100*150 | 2.5-16 | ||
| 180*180 | 3.0-16 | 100*200 | 2.5-16 | ||
| 200*200 | 3.0-16 | 100*250 | 2.5-16 | ||
| 250*250 | 4.75-20 | 150*300 | 4.5-16 | ||
| 300*300 | 4.75-20 | 200*300 | 5.5-20 | ||
| 400*400 | 4.75-20 | 200*400 | 5.5-20 | ||
| 500*500 | 4.75-20 | 400*600 | 5.5-20 |
Stuth toraidh agus seilbh meacanaigeach
| Stuth | Rubha Gnothachais (Mpa) | Neart tensile (Mpa) | Leudachadh (%) |
| Q195=Ìre B, SS330 SPHC,S185 | >195 | 315-430 | 32-33 |
| Q215=Ìre C/CS Seòrsa B, SS330 SPHC | >215 | 335-450 | 26-31 |
| Q235=Ìre D,SS400,S235 | >235 | 375-500 | 24-26 |
| Q345=Ìre 50/345, SPFC590,E/S335 | >345 | 470-630 | 21-22 |
Iarrtas: Cleachdadh togail pìoban ceàrnagach, saothrachadh innealan, pròiseactan togail stàilinn, togail shoithichean, innleadaireachd dealain, chassis càr, puirt-adhair, rèilichean rathaid, togail thaighean.
